URL http://paste-bin.com/view/ef3a8465

View Raw


Untitled

By FlamingLinux, 1 Month ago, written in php.
  1. DMA32 zone: 898215 pages, LIFO batch:31
  2.   Normal zone: 896 pages used for memmap
  3.   Normal zone: 64640 pages, LIFO batch:15
  4. Detected use of extended apic ids on hypertransport bus
  5. ACPI: Local APIC address 0xfee00000
  6. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  7. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  8. ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  9. ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  10. ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  11. IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
  12. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  13. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
  14. ACPI: IRQ0 used by override.
  15. ACPI: IRQ2 used by override.
  16. ACPI: IRQ9 used by override.
  17. Using ACPI (MADT) for SMP configuration information
  18. ACPI: HPET id: 0x1002a201 base: 0xfed00000
  19. SMP: Allowing 2 CPUs, 0 hotplug CPUs
  20. nr_irqs_gsi: 24
  21. early_res array is doubled to 64 at [3000 - 37ff]
  22. Allocating PCI resources starting at dff00000 (gap: dff00000:17100000)
  23. setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
  24. PERCPU: Embedded 26 pages/cpu @ffff880001a00000 s74536 r8192 d23768 u1048576
  25. pcpu-alloc: s74536 r8192 d23768 u1048576 alloc=1*2097152
  26. pcpu-alloc: [0] 0 1
  27. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 966797
  28. Kernel command line: root=/dev/ram0 real_root=/dev/sda6
  29. PID hash table entries: 4096 (order: 3, 32768 bytes)
  30. Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  31. Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  32. Checking aperture...
  33. No AGP bridge found
  34. Node 0: aperture @ 20000000 size 32 MB
  35. Aperture pointing to e820 RAM. Ignoring.
  36. Your BIOS doesn't leave a aperture memory hole
  37. Please enable the IOMMU option in the BIOS setup
  38. This costs you 64 MB of RAM
  39. Mapping aperture over 65536 KB of RAM @ 20000000
  40. early_res array is doubled to 128 at [3800 - 47ff]
  41. Subtract (57 early reservations)
  42.  #1 [0001000000 - 0001815e94]   TEXT DATA BSS
  43.  #2 [0037d1f000 - 0037ff0000]         RAMDISK
  44.  #3 [000009fc00 - 0000100000]   BIOS reserved
  45.  #4 [0001816000 - 00018162e7]             BRK
  46.  #5 [0000001000 - 0000003000]      TRAMPOLINE
  47.  #6 [0000008000 - 000000c000]         PGTABLE
  48.  #7 [000000c000 - 000000d000]         PGTABLE
  49.  #8 [0001816300 - 0001817300]         BOOTMEM
  50.  #9 [0001c17300 - 0001c174e0]         BOOTMEM
  51.  #10 [0002018000 - 0002019000]         BOOTMEM
  52.  #11 [0002019000 - 000201a000]         BOOTMEM
  53.  #12 [0002200000 - 0005800000]        MEMMAP 0
  54.  #13 [0001817300 - 0001817480]         BOOTMEM
  55.  #14 [0001817480 - 000182f480]         BOOTMEM
  56.  #15 [000182f480 - 0001830c80]         BOOTMEM
  57.  #16 [0001831000 - 0001832000]         BOOTMEM
  58.  #17 [0001815ec0 - 0001815f01]         BOOTMEM
  59.  #18 [0001815f40 - 0001815f83]         BOOTMEM
  60.  #19 [0001832000 - 0001832428]         BOOTMEM
  61.  #20 [0001830c80 - 0001830ce8]         BOOTMEM
  62.  #21 [0001830d00 - 0001830d68]         BOOTMEM
  63.  #22 [0001830d80 - 0001830de8]         BOOTMEM
  64.  #23 [0001830e00 - 0001830e68]         BOOTMEM
  65.  #24 [0001830e80 - 0001830ee8]         BOOTMEM
  66.  #25 [0001830f00 - 0001830f68]         BOOTMEM
  67.  #26 [0001830f80 - 0001830fe8]         BOOTMEM
  68.  #27 [0001832440 - 00018324a8]         BOOTMEM
  69.  #28 [00018324c0 - 0001832528]         BOOTMEM
  70.  #29 [0001832540 - 00018325a8]         BOOTMEM
  71.  #30 [00018325c0 - 0001832628]         BOOTMEM
  72.  #31 [0001832640 - 00018326a8]         BOOTMEM
  73.  #32 [00018326c0 - 0001832728]         BOOTMEM
  74.  #33 [0001832740 - 00018327a8]         BOOTMEM
  75.  #34 [00018327c0 - 0001832828]         BOOTMEM
  76.  #35 [0001832840 - 00018328a8]         BOOTMEM
  77.  #36 [00018328c0 - 0001832928]         BOOTMEM
  78.  #37 [0001832940 - 00018329a8]         BOOTMEM
  79.  #38 [0001815fc0 - 0001815fe3]         BOOTMEM
  80.  #39 [00018329c0 - 00018329e3]         BOOTMEM
  81.  #40 [0001a00000 - 0001a1a000]         BOOTMEM
  82.  #41 [0001b00000 - 0001b1a000]         BOOTMEM
  83.  #42 [0001834a00 - 0001834a08]         BOOTMEM
  84.  #43 [0001834a40 - 0001834a48]         BOOTMEM
  85.  #44 [0001834a80 - 0001834a88]         BOOTMEM
  86.  #45 [0001834ac0 - 0001834ad0]         BOOTMEM
  87.  #46 [0001834b00 - 0001834c40]         BOOTMEM
  88.  #47 [0001834c40 - 0001834ca0]         BOOTMEM
  89.  #48 [0001834cc0 - 0001834d20]         BOOTMEM
  90.  #49 [0001834d40 - 000183cd40]         BOOTMEM
  91.  #50 [0001c17500 - 0002017500]         BOOTMEM
  92.  #51 [0005800000 - 0005a00000]         BOOTMEM
  93.  #52 [0020000000 - 0024000000]         BOOTMEM
  94.  #53 [0005a00000 - 0009a00000]         BOOTMEM
  95.  #54 [000183cd40 - 000185cd40]         BOOTMEM
  96.  #55 [000185cd40 - 000189cd40]         BOOTMEM
  97.  #56 [000000d000 - 0000015000]         BOOTMEM
  98. Memory: 3723624k/4456448k available (3695k kernel code, 528332k absent, 204492k reserved, 3202k data, 460k init)
  99. Hierarchical RCU implementation.
  100. NR_IRQS:2304
  101. Console: colour VGA+ 80x25
  102. console [tty0] enabled
  103. hpet clockevent registered
  104. Fast TSC calibration using PIT
  105. Detected 1197.125 MHz processor.
  106. Calibrating delay loop (skipped), value calculated using timer frequency.. 2394.25 BogoMIPS (lpj=11971250)
  107. Mount-cache hash table entries: 256
  108. tseg: 00dff00000
  109. CPU: Physical Processor ID: 0
  110. CPU: Processor Core ID: 0
  111. mce: CPU supports 5 MCE banks
  112. using C1E aware idle routine
  113. Performance Events: AMD PMU driver.
  114. ... version:                0
  115. ... bit width:              48
  116. ... generic registers:      4
  117. ... value mask:             0000ffffffffffff
  118. ... max period:             00007fffffffffff
  119. ... fixed-purpose events:   0
  120. ... event mask:             000000000000000f
  121. Freeing SMP alternatives: 40k freed
  122. ACPI: Core revision 20100121
  123. Setting APIC routing to flat
  124. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  125. CPU0: AMD Athlon(tm) X2 Dual Core Processor L310 stepping 02
  126. Booting Node   0, Processors  #1 Ok.
  127. System has AMD C1E enabled
  128. Switch to broadcast mode on CPU1
  129. Brought up 2 CPUs
  130. Total of 2 processors activated (4788.24 BogoMIPS).
  131. Switch to broadcast mode on CPU0
  132. NET: Registered protocol family 16
  133. node 0 link 0: io port [0, ffffff]
  134. TOM: 00000000e0000000 aka 3584M
  135. node 0 link 0: mmio [a0000, bffff]
  136. node 0 link 0: mmio [e0000000, efffffff]
  137. node 0 link 0: mmio [f0000000, f20fffff]
  138. node 0 link 0: mmio [f2100000, f22fffff]
  139. node 0 link 0: mmio [f2300000, f6ffffff]
  140. node 0 link 0: mmio [f7000000, f7ffffff]
  141. node 0 link 0: mmio [f8000000, ffffffff]
  142. TOM2: 0000000120000000 aka 4608M
  143. bus: [00, 0f] on node 0 link 0
  144. bus: 00 index 0 [io  0x0000-0xffff]
  145. bus: 00 index 1 [mem 0x000a0000-0x000bffff]
  146. bus: 00 index 2 [mem 0xe0000000-0xffffffff]
  147. bus: 00 index 3 [mem 0x120000000-0xfcffffffff]
  148. ACPI: bus type pci registered
  149. dca service started, version 1.12.1
  150. PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xf7000000-0xf7ffffff] (base 0xf7000000)
  151. PCI: MMCONFIG at [mem 0xf7000000-0xf7ffffff] reserved in E820
  152. PCI: Using configuration type 1 for base access
  153. mtrr: your CPUs had inconsistent fixed MTRR settings
  154. mtrr: probably your BIOS does not setup all CPUs.
  155. mtrr: corrected configuration.
  156. bio: create slab <bio-0> at 0
  157. ACPI: EC: Look up EC in DSDT
  158. ACPI: Executed 1 blocks of module-level executable AML code
  159. ACPI: BIOS _OSI(Linux) query ignored
  160. ACPI: Interpreter enabled
  161. ACPI: (supports S0 S5)
  162. ACPI: Using IOAPIC for interrupt routing
  163. ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
  164. ACPI: No dock devices found.
  165. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  166. ACPI: PCI Root Bridge [PCI0] (0000:00)
  167. pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
  168. pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
  169. pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
  170. pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
  171. pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
  172. pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
  173. pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
  174. pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
  175. pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
  176. pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
  177. pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
  178. pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
  179. pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
  180. pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
  181. pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
  182. pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf6ffffff]
  183. pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xffffffff]
  184. pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
  185. pci 0000:00:04.0: PME# disabled
  186. pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
  187. pci 0000:00:05.0: PME# disabled
  188. pci 0000:00:11.0: reg 10: [io  0x8038-0x803f]
  189. pci 0000:00:11.0: reg 14: [io  0x804c-0x804f]
  190. pci 0000:00:11.0: reg 18: [io  0x8030-0x8037]
  191. pci 0000:00:11.0: reg 1c: [io  0x8048-0x804b]
  192. pci 0000:00:11.0: reg 20: [io  0x8010-0x801f]
  193. pci 0000:00:11.0: reg 24: [mem 0xf2306000-0xf23063ff]
  194. pci 0000:00:12.0: reg 10: [mem 0xf2305000-0xf2305fff]
  195. pci 0000:00:12.1: reg 10: [mem 0xf2304000-0xf2304fff]
  196. pci 0000:00:12.2: reg 10: [mem 0xf2306400-0xf23064ff]
  197. pci 0000:00:12.2: supports D1 D2
  198. pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
  199. pci 0000:00:12.2: PME# disabled
  200. pci 0000:00:14.2: reg 10: [mem 0xf2300000-0xf2303fff 64bit]
  201. pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
  202. pci 0000:00:14.2: PME# disabled
  203. pci 0000:01:05.0: reg 10: [mem 0xe0000000-0xefffffff pref]
  204. pci 0000:01:05.0: reg 14: [io  0x7000-0x70ff]
  205. pci 0000:01:05.0: reg 18: [mem 0xf2200000-0xf220ffff]
  206. pci 0000:01:05.0: reg 24: [mem 0xf2100000-0xf21fffff]
  207. pci 0000:01:05.0: supports D1 D2
  208. pci 0000:00:01.0: PCI bridge to [bus 01-01]
  209. pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
  210. pci 0000:00:01.0:   bridge window [mem 0xf2100000-0xf22fffff]
  211. pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
  212. pci 0000:02:00.0: reg 10: [mem 0xf1100000-0xf1103fff 64bit]
  213. pci 0000:02:00.0: supports D1 D2
  214. pci 0000:00:04.0: PCI bridge to [bus 02-07]
  215. pci 0000:00:04.0:   bridge window [io  0x3000-0x6fff]
  216. pci 0000:00:04.0:   bridge window [mem 0xf1100000-0xf20fffff]
  217. pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
  218. pci 0000:08:00.0: reg 10: [mem 0xf1000000-0xf103ffff 64bit]
  219. pci 0000:08:00.0: reg 18: [io  0x2000-0x207f]
  220. pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  221. pci 0000:08:00.0: PME# disabled
  222. pci 0000:00:05.0: PCI bridge to [bus 08-08]
  223. pci 0000:00:05.0:   bridge window [io  0x2000-0x2fff]
  224. pci 0000:00:05.0:   bridge window [mem 0xf1000000-0xf10fffff]
  225. pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  226. pci 0000:00:14.4: PCI bridge to [bus 09-09] (subtractive decode)
  227. pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
  228. pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
  229. pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  230. pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
  231. pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
  232. pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  233. pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
  234. pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
  235. pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
  236. pci 0000:00:14.4:   bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
  237. pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
  238. pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
  239. pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
  240. pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
  241. pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
  242. pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
  243. pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
  244. pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
  245. pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xf6ffffff] (subtractive decode)
  246. pci 0000:00:14.4:   bridge window [mem 0xf8000000-0xffffffff] (subtractive decode)
  247. pci_bus 0000:00: on NUMA node 0
  248. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  249. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
  250. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
  251. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
  252. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
  253. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  254. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  255. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  256. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  257. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  258. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  259. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  260. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  261. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
  262. vgaarb: loaded
  263. SCSI subsystem initialized
  264. PCI: Using ACPI for IRQ routing
  265. PCI: pci_cache_line_size set to 64 bytes
  266. reserve RAM buffer: 000000000009fc00 - 000000000009ffff
  267. reserve RAM buffer: 00000000de60c000 - 00000000dfffffff
  268. reserve RAM buffer: 00000000dfd70000 - 00000000dfffffff
  269. reserve RAM buffer: 00000000dfe92000 - 00000000dfffffff
  270. reserve RAM buffer: 00000000dfee2000 - 00000000dfffffff
  271. reserve RAM buffer: 00000000dff00000 - 00000000dfffffff
  272. Switching to clocksource hpet
  273. pnp: PnP ACPI init
  274. ACPI: bus type pnp registered
  275. pnp: PnP ACPI: found 10 devices
  276. ACPI: ACPI bus type pnp unregistered
  277. system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
  278. system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
  279. system 00:01: [mem 0xf7000000-0xf7ffffff] has been reserved
  280. system 00:08: [io  0x0400-0x04cf] has been reserved
  281. system 00:08: [io  0x04d0-0x04d1] has been reserved
  282. system 00:08: [io  0x04d6] has been reserved
  283. system 00:08: [io  0x0680-0x06ff] has been reserved
  284. system 00:08: [io  0x077a] has been reserved
  285. system 00:08: [io  0x0c00-0x0c01] has been reserved
  286. system 00:08: [io  0x0c14] has been reserved
  287. system 00:08: [io  0x0c50-0x0c52] has been reserved
  288. system 00:08: [io  0x0c6c] has been reserved
  289. system 00:08: [io  0x0c6f] has been reserved
  290. system 00:08: [io  0x0cd0-0x0cdb] has been reserved
  291. system 00:08: [io  0xfd60-0xfd63] has been reserved
  292. system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
  293. system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
  294. pci 0000:00:01.0: PCI bridge to [bus 01-01]
  295. pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
  296. pci 0000:00:01.0:   bridge window [mem 0xf2100000-0xf22fffff]
  297. pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
  298. pci 0000:00:04.0: PCI bridge to [bus 02-07]
  299. pci 0000:00:04.0:   bridge window [io  0x3000-0x6fff]
  300. pci 0000:00:04.0:   bridge window [mem 0xf1100000-0xf20fffff]
  301. pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
  302. pci 0000:00:05.0: PCI bridge to [bus 08-08]
  303. pci 0000:00:05.0:   bridge window [io  0x2000-0x2fff]
  304. pci 0000:00:05.0:   bridge window [mem 0xf1000000-0xf10fffff]
  305. pci 0000:00:05.0:   bridge window [mem pref disabled]
  306. pci 0000:00:14.4: PCI bridge to [bus 09-09]
  307. pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
  308. pci 0000:00:14.4:   bridge window [mem disabled]
  309. pci 0000:00:14.4:   bridge window [mem pref disabled]
  310. pci 0000:00:01.0: setting latency timer to 64
  311. pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  312. pci 0000:00:04.0: setting latency timer to 64
  313. pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  314. pci 0000:00:05.0: setting latency timer to 64
  315. pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
  316. pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
  317. pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  318. pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
  319. pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
  320. pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
  321. pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
  322. pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
  323. pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
  324. pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
  325. pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
  326. pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
  327. pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
  328. pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
  329. pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
  330. pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf6ffffff]
  331. pci_bus 0000:00: resource 20 [mem 0xf8000000-0xffffffff]
  332. pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
  333. pci_bus 0000:01: resource 1 [mem 0xf2100000-0xf22fffff]
  334. pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
  335. pci_bus 0000:02: resource 0 [io  0x3000-0x6fff]
  336. pci_bus 0000:02: resource 1 [mem 0xf1100000-0xf20fffff]
  337. pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref]
  338. pci_bus 0000:08: resource 0 [io  0x2000-0x2fff]
  339. pci_bus 0000:08: resource 1 [mem 0xf1000000-0xf10fffff]
  340. pci_bus 0000:09: resource 0 [io  0x1000-0x1fff]
  341. pci_bus 0000:09: resource 4 [io  0x0000-0x0cf7]
  342. pci_bus 0000:09: resource 5 [io  0x0d00-0xffff]
  343. pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
  344. pci_bus 0000:09: resource 7 [mem 0x000c0000-0x000c3fff]
  345. pci_bus 0000:09: resource 8 [mem 0x000c4000-0x000c7fff]
  346. pci_bus 0000:09: resource 9 [mem 0x000c8000-0x000cbfff]
  347. pci_bus 0000:09: resource 10 [mem 0x000cc000-0x000cffff]
  348. pci_bus 0000:09: resource 11 [mem 0x000d0000-0x000d3fff]
  349. pci_bus 0000:09: resource 12 [mem 0x000d4000-0x000d7fff]
  350. pci_bus 0000:09: resource 13 [mem 0x000d8000-0x000dbfff]
  351. pci_bus 0000:09: resource 14 [mem 0x000dc000-0x000dffff]
  352. pci_bus 0000:09: resource 15 [mem 0x000e0000-0x000e3fff]
  353. pci_bus 0000:09: resource 16 [mem 0x000e4000-0x000e7fff]
  354. pci_bus 0000:09: resource 17 [mem 0x000e8000-0x000ebfff]
  355. pci_bus 0000:09: resource 18 [mem 0x000ec000-0x000effff]
  356. pci_bus 0000:09: resource 19 [mem 0xe0000000-0xf6ffffff]
  357. pci_bus 0000:09: resource 20 [mem 0xf8000000-0xffffffff]
  358. NET: Registered protocol family 2
  359. IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
  360. TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
  361. TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  362. TCP: Hash tables configured (established 262144 bind 65536)
  363. TCP reno registered
  364. UDP hash table entries: 2048 (order: 4, 65536 bytes)
  365. UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  366. NET: Registered protocol family 1
  367. RPC: Registered udp transport module.
  368. RPC: Registered tcp transport module.
  369. RPC: Registered tcp NFSv4.1 backchannel transport module.
  370. pci 0000:01:05.0: Boot video device
  371. PCI: CLS 64 bytes, default 64
  372. Trying to unpack rootfs image as initramfs...
  373. Freeing initrd memory: 2884k freed
  374. PCI-DMA: Disabling AGP.
  375. PCI-DMA: aperture base @ 20000000 size 65536 KB
  376. PCI-DMA: using GART IOMMU.
  377. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
  378. Simple Boot Flag at 0x44 set to 0x1
  379. VFS: Disk quotas dquot_6.5.2
  380. Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  381. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  382. NTFS driver 2.1.29 [Flags: R/O].
  383. SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
  384. SGI XFS Quota Management subsystem
  385. msgmni has been set to 7407
  386. alg: No test for stdrng (krng)
  387. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  388. io scheduler noop registered
  389. io scheduler deadline registered (default)
  390. pcieport 0000:00:04.0: setting latency timer to 64
  391. pcieport 0000:00:05.0: setting latency timer to 64
  392. Linux agpgart interface v0.103
  393. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  394. brd: module loaded
  395. loop: module loaded
  396. Uniform Multi-Platform E-IDE driver
  397. ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
  398. Probing IDE interface ide0...
  399. ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  400. Probing IDE interface ide1...
  401. ide1 at 0x170-0x177,0x376 on irq 15
  402. ide-gd driver 1.18
  403. ide-cd driver 5.00
  404. Loading iSCSI transport class v2.0-870.
  405. iscsi: registered transport (tcp)
  406. SCSI Media Changer driver v0.25
  407. Atheros(R) L2 Ethernet Driver - version 2.2.3
  408. Copyright (c) 2007 Atheros Corporation.
  409. jme: JMicron JMC2XX ethernet driver version 1.0.6
  410. aoe: AoE v47 initialised.
  411. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
  412. serio: i8042 KBD port at 0x60,0x64 irq 1
  413. serio: i8042 AUX port at 0x60,0x64 irq 12
  414. mice: PS/2 mouse device common for all mice
  415. cpuidle: using governor ladder
  416. ioatdma: Intel(R) QuickData Technology Driver 4.00
  417. TCP cubic registered
  418. NET: Registered protocol family 17
  419. Freeing unused kernel memory: 460k freed
  420. Write protecting the kernel read-only data: 6144k
  421. Freeing unused kernel memory: 380k freed
  422. Freeing unused kernel memory: 744k freed
  423. input: AT Translated Set 2 keyboard as /class/input/input0
  424. libata version 3.00 loaded.
  425. Error: Driver 'pata_platform' is already registered, aborting...
  426. Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000
  427. input: SynPS/2 Synaptics TouchPad as /class/input/input1
  428. ahci 0000:00:11.0: version 3.0
  429. ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  430. ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
  431. ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
  432. scsi0 : ahci
  433. scsi1 : ahci
  434. scsi2 : ahci
  435. scsi3 : ahci
  436. scsi4 : ahci
  437. scsi5 : ahci
  438. ata1: SATA max UDMA/133 abar m1024@0xf2306000 port 0xf2306100 irq 22
  439. ata2: SATA max UDMA/133 abar m1024@0xf2306000 port 0xf2306180 irq 22
  440. ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22
  441. ata4: SATA max UDMA/133 abar m1024@0xf2306000 port 0xf2306280 irq 22
  442. ata5: SATA max UDMA/133 abar m1024@0xf2306000 port 0xf2306300 irq 22
  443. ata6: SATA max UDMA/133 abar m1024@0xf2306000 port 0xf2306380 irq 22
  444. ata4: SATA link down (SStatus 0 SControl 300)
  445. ata2: SATA link down (SStatus 0 SControl 300)
  446. ata5: SATA link down (SStatus 0 SControl 300)
  447. ata6: SATA link down (SStatus 0 SControl 300)
  448. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  449. ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC60F, max UDMA/133
  450. ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  451. ata1.00: configured for UDMA/133
  452. scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
  453. sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  454. sd 0:0:0:0: [sda] Write Protect is off
  455. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  456. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  457.  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
  458. sd 0:0:0:0: [sda] Attached SCSI disk
  459. ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  460. ata3.00: ATAPI: Optiarc DVD RW AD-7700S, 1.B0, max UDMA/100, ATAPI AN
  461. ata3.00: configured for UDMA/100
  462. scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7700S  1.B0 PQ: 0 ANSI: 5
  463. sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  464. Uniform CD-ROM driver Revision: 3.20
  465. sr 2:0:0:0: Attached scsi CD-ROM sr0
  466. sd 0:0:0:0: Attached scsi generic sg0 type 0
  467. sr 2:0:0:0: Attached scsi generic sg1 type 5
  468. scsi: <fdomain> Detection failed (no card)
  469. GDT-HA: Storage RAID Controller Driver. Version: 3.05
  470. Fusion MPT base driver 3.04.14
  471. Copyright (c) 1999-2008 LSI Corporation
  472. Fusion MPT SPI Host driver 3.04.14
  473. Fusion MPT FC Host driver 3.04.14
  474. Fusion MPT SAS Host driver 3.04.14
  475. 3ware Storage Controller device driver for Linux v1.26.02.002.
  476. 3ware 9000 Storage Controller device driver for Linux v2.26.02.013.
  477. Compaq SMART2 Driver (v 2.6.0)
  478. HP CISS Driver (v 3.6.20)
  479. Adaptec aacraid driver 1.1-5[24702]-ms
  480. megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
  481. megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
  482. megasas: 00.00.04.17.1-rc1 Thu. Oct. 29, 11:41:51 PST 2009
  483. QLogic Fibre Channel HBA Driver: 8.03.02-k2
  484. Emulex LightPulse Fibre Channel SCSI driver 8.3.10
  485. Copyright(c) 2004-2009 Emulex.  All rights reserved.
  486. aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
  487. usbcore: registered new interface driver usbfs
  488. usbcore: registered new interface driver hub
  489. usbcore: registered new device driver usb
  490. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  491. ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  492. ehci_hcd 0000:00:12.2: setting latency timer to 64
  493. ehci_hcd 0000:00:12.2: EHCI Host Controller
  494. ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
  495. ehci_hcd 0000:00:12.2: debug port 1
  496. ehci_hcd 0000:00:12.2: irq 17, io mem 0xf2306400
  497. ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
  498. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  499. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  500. usb usb1: Product: EHCI Host Controller
  501. usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
  502. usb usb1: SerialNumber: 0000:00:12.2
  503. hub 1-0:1.0: USB hub found
  504. hub 1-0:1.0: 6 ports detected
  505. Initializing USB Mass Storage driver...
  506. usbcore: registered new interface driver usb-storage
  507. USB Mass Storage support registered.
  508. uhci_hcd: USB Universal Host Controller Interface driver
  509. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  510. ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  511. ohci_hcd 0000:00:12.0: setting latency timer to 64
  512. ohci_hcd 0000:00:12.0: OHCI Host Controller
  513. ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
  514. ohci_hcd 0000:00:12.0: irq 16, io mem 0xf2305000
  515. usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  516. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  517. usb usb2: Product: OHCI Host Controller
  518. usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 ohci_hcd
  519. usb usb2: SerialNumber: 0000:00:12.0
  520. hub 2-0:1.0: USB hub found
  521. hub 2-0:1.0: 3 ports detected
  522. ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  523. ohci_hcd 0000:00:12.1: setting latency timer to 64
  524. ohci_hcd 0000:00:12.1: OHCI Host Controller
  525. ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 3
  526. ohci_hcd 0000:00:12.1: irq 16, io mem 0xf2304000
  527. usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  528. usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  529. usb usb3: Product: OHCI Host Controller
  530. usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 ohci_hcd
  531. usb usb3: SerialNumber: 0000:00:12.1
  532. hub 3-0:1.0: USB hub found
  533. hub 3-0:1.0: 3 ports detected
  534. usbcore: registered new interface driver hiddev
  535. usbcore: registered new interface driver usbhid
  536. usbhid: USB HID core driver
  537. sl811: driver sl811-hcd, 19 May 2005
  538. usb 1-4: new high speed USB device using ehci_hcd and address 4
  539. usb 1-4: New USB device found, idVendor=04f2, idProduct=b044
  540. usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
  541. usb 1-4: Product: CNF7017
  542. usb 1-4: Manufacturer: Chicony Electronics Co., Ltd.
  543. usb 1-4: SerialNumber: SN0001
  544. device-mapper: uevent: version 1.0.3
  545. device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
  546. usb 2-1: new low speed USB device using ohci_hcd and address 2
  547. usb 2-1: New USB device found, idVendor=046d, idProduct=c018
  548. usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  549. usb 2-1: Product: USB Optical Mouse
  550. usb 2-1: Manufacturer: Logitech
  551. input: Logitech USB Optical Mouse as /class/input/input2
  552. generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-1/input0
  553. md: raid0 personality registered for level 0
  554. usb 2-2: new full speed USB device using ohci_hcd and address 3
  555. md: raid1 personality registered for level 1
  556. usb 2-2: New USB device found, idVendor=046d, idProduct=0a03
  557. usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  558. usb 2-2: Product: Logitech USB Microphone
  559. usb 2-2: Manufacturer: Logitech
  560. raid6: int64x1   1073 MB/s
  561. raid6: int64x2   1404 MB/s
  562. raid6: int64x4   1102 MB/s
  563. raid6: int64x8    989 MB/s
  564. raid6: sse2x1     646 MB/s
  565. raid6: sse2x2    1112 MB/s
  566. raid6: sse2x4    1505 MB/s
  567. raid6: using algorithm sse2x4 (1505 MB/s)
  568. async_tx: api initialized (async)
  569. xor: automatically using best checksumming function: generic_sse
  570.    generic_sse:  3696.000 MB/sec
  571. xor: using function: generic_sse (3696.000 MB/sec)
  572. md: raid6 personality registered for level 6
  573. md: raid5 personality registered for level 5
  574. md: raid4 personality registered for level 4
  575. md: raid10 personality registered for level 10
  576. JFS: nTxBlock = 8192, nTxLock = 65536
  577. fuse init (API version 7.13)
  578. Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
  579. Copyright (c) 1999-2006 Intel Corporation.
  580. kjournald starting.  Commit interval 5 seconds
  581. EXT3-fs (sda6): mounted filesystem with writeback data mode
  582. udev: starting version 149
  583. <3>udev: missing sysfs features; please update the kernel or disable the kernel's CONFIG_SYSFS_DEPRECATED option; udev may fail to work correctly
  584. input: Power Button as /class/input/input3
  585. ACPI: Power Button [PWRB]
  586. input: Sleep Button as /class/input/input4
  587. ACPI: Sleep Button [SLPB]
  588. input: Lid Switch as /class/input/input5
  589. lib80211: common routines for IEEE802.11 drivers
  590. lib80211_crypt: registered algorithm 'NULL'
  591. ACPI: processor limited to max C-state 1
  592. ACPI: Invalid active0 threshold
  593. thermal LNXTHERM:01: registered as thermal_zone0
  594. ACPI: Thermal Zone [THRM] (52 C)
  595. atl1c 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  596. atl1c 0000:08:00.0: setting latency timer to 64
  597. ACPI: Lid Switch [LID]
  598. input: Power Button as /class/input/input6
  599. ACPI: Power Button [PWRF]
  600. Real Time Clock Driver v1.12b
  601. atl1c 0000:08:00.0: version 1.0.0.2-NAPI
  602. ACPI: Battery Slot [BAT1] (battery present)
  603. ACPI: AC Adapter [ACAD] (on-line)
  604. acpi device:02: registered as cooling_device2
  605. input: Video Bus as /class/input/input7
  606. ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
  607. wl: module license 'MIXED/Proprietary' taints kernel.
  608. Disabling lock debugging due to kernel taint
  609. wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  610. wl 0000:02:00.0: setting latency timer to 64
  611. lib80211_crypt: registered algorithm 'TKIP'
  612. eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.60.48.36
  613. HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  614. HDA Intel 0000:00:14.2: setting latency timer to 64
  615. usbcore: registered new interface driver snd-usb-audio
  616. hda_codec: ALC272: BIOS auto-probing.
  617. EXT3-fs (sda6): using internal journal
  618. atl1c 0000:08:00.0: Unable to allocate MSI interrupt Error: -1
  619. pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  620. atl1c 0000:08:00.0: Unable to allocate MSI interrupt Error: -1
  621. atl1c 0000:08:00.0: Unable to allocate MSI interrupt Error: -1
  622. NET: Registered protocol family 10
  623. lo: Disabled Privacy Extensions
  624. ADDRCONF(NETDEV_UP): eth0: link is not ready
  625. eth1: no IPv6 routers present
  626.  
Powered By Stikked created by Ben McRedmond